Rear Defrost Button
Press and release the button on the
touchscreen, or push and release the
button on the faceplate, to turn on the
rear window defrost
er and the heated
outside mirrors (if equipped). The Rear Defrost indicator
illuminates when the rear window defroster is on. The
rear window defroster automatically turns off after 10
minutes.
NOTE:
If the rear defrost is turned on again after the first
time-out, it will be enabled for 5 minutes and then
automatically turn off.
CAUTION!
Failure to follow these cautions can cause damage to
the heating elements:
● Use care when washing the inside of the rear
window. Do not use abrasive window cleaners on
the interior sur
face of the window. Use a soft cloth
and a mild washing solution, wiping parallel to the
heating elements. Labels can be peeled off after
soaking with warm water.
(Continued)
CAUTION!
● Do no
t use scrapers, sharp instruments, or
abrasive window cleaners on the interior surface
of the window
.
● Keep all objects a safe distance from the window.
Driver And Passenger Temperature
Control Buttons
These buttons provide the driver and passenger with
independent temperature contr
ol.
Push the red button on the faceplate
or touchscreen or press and slide the
temperature bar towards the red arrow
button on the touchscreen for warmer
temperature settings.
Push the blue button on the faceplate
or touchscreen or press and slide the
temperature bar towards the blue arrow
button on the touchscreen for cooler
temperature settings.
Sync Button
Press the Sync button on the touchscreen
to toggle the Sync feature on/off. The Sync
indicator is illuminated when Sync is on.
Sync is used t
o synchronize the passenger
temperature setting with the driver temperature setting.
Changing the passenger temperature setting while in
Sync will automatically exit this feature.
NOTE:
The Sync button is only available on the touchscreen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the Climate
Control system. There are seven blower
speeds available. Adjusting the blower will
cause automatic mode to switch to manual operation.
The speeds can be selected using either the blower
control knob on the faceplate or the buttons on the
touchscreen.
Faceplate
The blower speed increases as you turn the blower
control knob clockwise from the lowest blower setting.
The blower speed decreases as you turn the blower
control knob counterclockwise.
GETTING TO KNOW YOUR VEHICLE 51
To Next Page
Loading...
