Display
By selecting Display, the following settings can be
selected:
● Language: select the language in which to display
the information/warnings.
● Phone Repetition: displays information relating to the
phone mode.
Security
Passenger Air Bag Disable (PAD): a selection of
Passenger Air Bag Disable (ON/OFF) may be made if
a child restraint must be installed in the front seat.
Safety And Assistance
By selecting the item Safety and Assistance, the
following adjustments can be made:
● Speed Warning: Set the vehicle speed limit, which
the driver is notified through a visual and acoustic
signaling (display of a message and a symbol on
the display). When the speed warning is set, the
icon (a circle with the set speed inside of it) should
remain visualized until the driver turns the Speed
W
arning off. If the driver exceeded the set speed, a
single chime will sound along with a pop up message
of “Speed Warning Exceeded.” Driver may also turn
the Speed Warning “OFF” in the Instrument Cluster
Display should you choose not to use this feature.
To turn the feature off, the driver must use the
Instrument Cluster Display buttons to navigate to the
Speed Warning, and then press the up or down
arrow button until you reach “OFF” rather than a
speed.
● Hill Start Assist: Activation/Deactivation of the Hill
Start Assist system
Compass (If Equipped)
By selecting Com
pass, the following settings can be
changed:
Calibration (If Equipped)
This compass is self-calibrating, which eliminates the
need to set the compass manually. When the vehicle is
new, the compass may appear erratic, and the cluster
will display dashes (- -) until the compass is calibrated.
You may also calibrate the compass by completing one
or more 360 degree turns (in an area free from large
me
tal or metallic objects) until the dashes (- -) displayed
in the instrument cluster display turns off. The compass
will now function normally.
Variance (If Equipped)
Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences, the variance should be set for the zone
where the vehicle is driven, per the zone map.
Once properly set, the compass will automatically
compensate for the differences and provide the most
accurate compass heading.
NOTE:
Keep magnetic materials away from the top of the
instrument panel, such as iPod’s, Mobile Phones,
Laptops, and Radar Detectors. This is where the
compass module is located, and it can cause
interference with the compass sensor, and it may give
false readings.
92 GETTING TO KNOW YOUR INSTRUMENT PANEL
To Next Page
Loading...
