Support : support@jennov.com
- 10 -
Wireless (hotspot) connection method diagram
(When you use wirelesss/hotspot connection,
please don't connect the ethernet cable)
Reset button
Antenna
Power supply port
Surveillance Camera
LAN port
Mobile phone
The following diagram is for reference only. The appearance
and model of the camera you purchased may be different, but it
won't affect the setup.
*When you use the wireless/hotspot connection, the camera
needs to be plugged into a power adapter (do not connect an
Ethernet cable).
(If you connect an Ethernet cable, the hotspot/WIFI signal cannot
be found).
To Next Page
Loading...
Need help?
General
