Support : support@jennov.com
- 39 -
Connecting the camera to wireless on computer
1. If you are setting up the camera for the first time, you need to connect the
camera to the router with an Ethernet cable.
2. Click on
"
WiFi
"
button and enter the following interface.
3. Click on
"
Search
"
button as shown below, and select your home WiFi. Enter
your home WiFi password in both
"
Password
"
and
"
Confirm Password
"
fields.
4. Click on
"
Apply
"
to establish a wireless connection. Remove the LAN cable in
this state.
Note: If you have previously set up the connection between the camera and the
router with your smartphone, you do not need to set it up again on your PC. Just
search for the camera on your computer and add it.
1
4
3
2
5
6
To Next Page
Loading...
Need help?
General
