EasyManua.ls Logo

Jensen AWM914 - Sleep Timer and Alarm Settings; Mute, Loudness, Clock, and Aux Input

Jensen AWM914
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AWM914
5
Sleep Mode
Sleep: The Sleep Timer will automatically turn off the AWM914 in
the designated number of minutes. To set the Sleep Time, press
VOL +/- repeatedly to change the sleep time from 0(off), 15, 30 or
60 minutes.
Setting the alarm
Alarm ON/OFF: Press VOL +/- to turn on and off the alarm. The
ALARM icon will show on the display.
Alarm Hour: The number representing the hours will flash. Press
VOL +/- to adjust the alarm hour.
Alarm MIN: The number representing the minutes will flash.
Press VOL +/- to adjust the alarm minute.
Reset
RESET: Press 6/ENTER button (11) to reset to factory default
settings. Display will show OK when Reset is accomplished.
This function will time out after 5 seconds of inactivity and the unit
will resume normal operation.
Mute / Loudness
Press the MUTE/LOUD button (13) to silence the audio output in tuner,
Bluetooth or auxiliary/input mode. Press again to restore the previous
volume level. Press and hold the MUTE/LOUD button to toggle the
Loudness function on/off. Display will show LOUD when on.
Auxiliary Input Function
Press the MODE/MENU button (7) to directly access auxiliary input
modes from any other mode when a portable audio device is
connected to the unit. To connect a portable audio device, insert a
standard 3.5 mm (audio line output or headphone output from your
portable CD / MP3 / iPod or other media player) into the AUX IN
connector (6) on the front of the unit. Display will show
when on.
Auxiliary Input Connector
Connect the device to the AUX IN connector (6) on the front panel, and
then press MODE/MENU to switch to auxiliary input mode.
Clock Display
Press the T/F button (12) to alternate the display between Playback
mode and clock time while in Tuner, Bluetooth or auxiliary input mode.
Clock Setup
Press and hold the T/F button (12) to access Clock Setup mode. The
number representing the hours will flash. Press VOL +/- buttons to
adjust the hour. Press T/F again briefly and the number representing
the minutes will flash. Press the VOL +/- buttons to adjust the minutes.
The new time will be saved 5 seconds after the last adjustment is
made.
Speaker Output
The two speaker output buttons (5) (SPEAKER A and SPEAKER B)
control speaker output from the radio. Press any of the two buttons to
turn the corresponding speaker sets on or off.

Related product manuals