VM9314
NOTE: You can press
and
hold
to drag the "Source
Menu"
icons
and
rearrange them based on
your
preference
External Devices
External peripheral devices, including a game console, camcorder, navigation
unit, iPod, Zune, etc. can be connected to this unit via RCA output using the
AN
Media Adapter Cable (included).
~
iDRl9ht
Audio
rfr§
12l
Left
Audio
r:::CJl
Ground
I
r:;:
~
Video
~~
3.5mm
AN
Cable (not Included)
Connect the external device to the
AN
Media Adapter Cable and then plug the
cable into the
AN
INPUT connector (6) on the front
of
the radio. Select "AUX
1" mode to access the front
AN
input or "AUX 2" mode for the rear aux input.
You cannot directly control external devices connected to the
AN
INPUT. For
information regarding the use
of
USB/SD devices, see "Inserting a USB
Device" or "Accessing an SD Card" on page 46.
Micro
SD
Slots
(for
service use only)
The micro
SD
slot, located behind the monitor, cannot be used for file
playback. This input is for use by service professionals only for software
updates.
Volume
Adjustment
Volume Increase/Decrease
To
increase or decrease the volume level, turn the rotary encoder (1) on the
front panel
or
press the VOL-/+ buttons (15, 16) on remote control. When the
volume level reaches
"a"
or
"40", a beep sounds, indicating that the adjustment
limit has been reached. The LCD or TFT screen displays the volume level for 3
seconds.
16
To Next Page
Loading...
Need help?
General
