VM9314
Reconnecting
Once the Bluetooth device has been paired, you can touch the connect
..,~
button (9) to reconnect.
NOTE:
You
can
only
connect to a phone using the
buttons
on the on-
screen Phone interface.
Each time the
~~
button
is
pressed, the head unit will automatically reconnect
with the mobile phone once (only
if
the mobile phone was previously paired
with the head unit).
Managing
Incoming
Calls
When connected to a Bluetooth phone, the unit will mute audio output, pause
CD
play, and change to the Bluetooth screen when a call is received. An
incoming phone number will appear at the top
of
the screen.
Answering an Incoming Call
To
answer the call, touch the
~
button (11).
NOTE:
The
TALK button on the BTM15 can be
used
to answercalls
or
hang
up.
For best reception, speak loudly and clearly.
To
end the conversation, press the
~
button (12). The screen will display the
call duration for 3 seconds, and then return to the previous mode.
Rejecting an Incoming Call
Touch the
~
button to reject an incoming call. The call will revert to your
phone and can be answered directly or left for voice mail.
Volume Control
To
increase or decrease the volume level, turn the AUDIO control (1) on the
front panel or press the VOL+/ VOL- buttons on the remote control (15,16).
Making
an Outgoing Call
NOTE: Press the
~
button from the main Bluetooth screen to
automatically dial the last call received.
67
To Next Page
Loading...
