VM9314
What's
in
the
Box
VM9314 Head Unit
Single
01
N Sleeve
Wiring Harness
Parking Brake Sensor Extension Wire
Mounting Hardware3 Voice control microphone
with mounting brackets
Cosmetic Trim Ring
Remote Control with Battery
3.5mm to 3.5mm Media Adaptor Cable
Owners Manual
Installation Guide
Tools
and
Supplies
You
will need these tools and supplies to install your VM9314:
Torx type, flat-head and Philips screwdrivers
Wire cutters and strippers
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 - 18 gauge speaker wire
WARNING! Never install this unit where operation and viewing could interfere with safe driving
conditions.
1
To Next Page
Loading...
