RADIO TUNER MODE
Select Radio as Playing Source
Open the SOURCE MENU and then touch [Radio].
Selecting a Radio Band
Press the [BAND] Button on the remote control or touch the [ ] icon on the user
interface to select one radio band among FM1, FM2, FM3, AM1 and AM2.
Tuning AM-FM Stations
Seek Tuning
Press the [ ] / [ ] Buttons on the remote control or touch the [ ] / [ ]
icons on the user interface to Seek the next / previous radio station.
To stop searching, repeat the operation above or press other Buttons having
radio functions. NOTE: When a station is received, searching stops and the
station is
played.
Manual Tuning
Method 1:
Press and hold the [ ] or [ ] icon for 1 second to enter Manual Tuning mode.
During manual tuning, the frequency will be changed in steps.
Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.
Method 2:
1. Touch the numeric keypad icon [ ]. Numeric keyboard is displayed, touch
numbers to input frequency.
2. Touch [ ] to delete the input numbers step by step.
3. Touch [ OK ] to enter.
Preset Stations
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store
6 stations; hence the unit can store 30 stations in total.
Storing Radio Stations in Memory
1. Tune to a desired station.
2. Touch and hold one of the presets (1 to 6) to save the selected station.
Figure 9. Radio Screen
To Next Page
Loading...
