Adjusting the Fader and Balance
The user can adjust front/rear fader settings, L/R balance settings, and
subwoofer levels here.
1. Enter the EQ setup mode.
2. Touch the [ ] icon in the EQ interface menu.
Balance - This feature is used to balance the audio output levels between the left
and right side of the vehicle. Touch the t or u icons to change the balance
control settings -12 (Left) to +12 (Right). The setting can also be changed by
touching screen within the grid to move the blue sphere.
Fader - This feature is used to fade the audio output levels between the
front and rear of the vehicle. Touch the p or q icons to change the fade
control settings -12 (Rear) to +12 (Front). The setting can also be changed by
touching screen within the grid to move the blue sphere.
Sub (Subwoofer) - This feature is used to reduce or increase the subwoofer
sound level. Touch the slide bar t or u icons to adjust the subwoofer
volume from -12 to +12. This setting will vary depending on the input level
setting of your subwoofer amplifier.
To exit Balance-Fader, touch the return icon on the top left corner of the screen.
To Next Page
Loading...
