Jensen VX3014 - Making a Call; Receiving a Call

Disconnecting a BT Device
To disconnect one device, touch [ Disconnect ]. After "Disconnect" is pressed,
the radio will display a screen listing paired devices. Pressing the Green "Connect"
icon will reconnect a previously paired phone to the VX3024. Pressing
the "Wastebin" icon next to a device's name will unpair the phone from the radio.
NOTES.
• The device will be disconnected when the device is moved beyond the
operational range.
•
If you want to reconnect the device to the unit, place it within operational
range.
•
If you do not want to reconnect the device to the unit automatically, touch
[ Options ], then set [ Auto connect ] to [ OFF ].
For details, see the “Adjust BT Settings” section.
Making a Call
1.
2.
3. Search for phone number from the following list:
[Phone Book]
[Call Log]
[Missed calls]
[Received calls]
[Dialed calls]
Select BT function in the home menu.
Press "Option". Go to > "Phone Synch". Press "Synch" to import the mobile
phone contacts. If you have many contacts, this may take up to 3-4 minutes
initially. Up to 1000 contacts can be imported.
Or touch the number pad directly, then touch [ ] to dial.
Receiving a Call
By default, all incoming calls are received automatically.
1. If there is an incoming call, the screen will display “Incoming call...”.
2. Touch the screen to select [ hang up ] or [ Answer ].
Speak into the BT microphone.
Tip
You can select to receive calls manually by setting
[Auto Answer] to [OFF]
1. In BT menu, touch [ Options ]. The
option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [BT]: To turn the “BT” function ON or OFF.
∙ [Auto connect]: To turn the “Auto Connect” function ON or OFF .
∙ [Auto answer]: To turn the “Auto Answer” function ON or OFF .
∙ [Pairing code]: To set the paring code.
∙ [Phone synch]: To synchronize phone book, touch [ OK ] on the sub-menu
Phonebook synch may take several minutes to
load on initial setup.
Adjust BT Settings