1. Touch the numeric keypad icon [ ]. Numeric keyboard is displayed, touch
numbers to input frequency.
2. Touch [ ] to delete the input numbers step by step.
3. Touch [ OK ] to enter.
Preset Stations
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can
store 6 stations; hence the unit can store 30 stations in total.
Storing Radio Stations in Memory
1. Tune to a desired station.
2.
Touch and hold one of the presets (1 to 6) to save the selected station.
RADIO TUNER MODE
Select Radio as Playing Source
Open the SOURCE MENU and then touch [Radio].
Selecting a Radio Band
Press th BAND button on the remote control or touch the BAND icon on the user
interface to select one radio band among FM1, FM2, FM3, AM1 and AM2.
Tuning AM-FM Stations
Seek Tuning
Press the [ ] / [ ] Buttons on the remote control or touch the [ ] / [ ]
icons on the user interface to Seek the next / previous radio station.
To stop searching, repeat the operation above or press other buttons having
radio functions.
NOTE: When a station is received, searching stops and the station is
played.
Manual Tuning
Method 1:
Press and hold [ ] or [ ] icon for 1 second to enter manual tuning mode and
increment one frequency step. Press and hold [ ] or [ ] again to increment to
the next frequency step. Continue this method until the desired frequency is
tuned in.
Method 2:
To Next Page
Loading...
Need help?
General
