Section 2 : Pre-operation and Inspection
2-6 5376000277
8. Knee Boom/Underlift
a. Knee Boom Pivot pin secure
b. Cylinder pins secure
c. Hydraulic hoses undamaged, not leaking
d. Underlift pivot pin, secure
e. Underlift tilt pivot pin, secure
f. Check wear pads for presence of grease
9. Wheellift/Crossbar
a. Crossbar pivot pin, secure
b. Crossbar pivot pin, presence of grease
c. Cylinder pins secure (If Equipped)
d. Hydraulic hoses undamaged, not leaking (If Equipped)
e. Components undamaged
f. Pins undamaged
g. Presence of grease
10. Winch Sheave(s) (If equipped)
a. Check for presence of grease
b. Pivot pin secure
11. Wire Rope(s) and Hook(s) (If equipped)
a. Wire Rope, Undamaged
b. Wire Rope, presence of grease
c. Wire Rope Hooks, Undamaged
d. Wire Rope Hook Latches, Undamaged and functional
12. Winch(s) (If Equipped)
a. Hydraulic hoses undamaged, not leaking
b. Gear oil level full
To Next Page
Loading...