Section 4: Operation
5376000277 4-43
4.12 SPADE FOOT ATTACHMENT (OPTIONAL)
The MPL-40 can be supplied with an optional spade foot attachment that will
allow you stabilize the MPL-40 against movement and make heavier pulls
with your wrecker boom.
1. Remove the spade foot
attachment from the toolbox.
2. Install the spade foot to the
bottom of the underlift boom
using the hitch pins.
3. Secure with hitch pins and
lynch pins.
4. Lower the underlift boom and
spade to the ground.
Area must be clear of feet
when lowering the underlift
boom.
Do not move the recovery vehicle with the spades on the ground or
damage to the chassis can occur.
CAUTION
To Next Page
Loading...