Section 4: Operation
5376000277 4-25
14. Raise the underlift boom to the
desired towing height.
15. Tie the front of the motorcycle
to the rear of the wrecker body.
Attach the lasso style straps to
each of the handle bars.
16. Place the hook on one end of
the “front” strap to the loop of
the lasso strap on the handle
bars and place the hook on
the other end to the rear of the
wrecker body and tighten with
the ratchet. Repeat for the
other side.
17. Use the safety chains to prevent
the wheel grid from pivoting
during travel. Loop the end of
the safety chain around the grid
and secure with the grab hook.
Remove the slack in the chain
and secure the chain in the
keyslot of the chain box.
Care should be taken when
lifting the boom. Do not try
to level the underlift. The
straps may overtighten or
become loose.
To Next Page
Loading...