Jet JCS-10 User Manual

'"
J t=T
Jes~;o
SHOWN WITH ACCESSORY
STAND
AND ELECTRICALS
The Seriai No. and Model No. plate is attached
to the rear
brace of" the saw cabinet, Locale
this plate and record the Seriai No. and Model
No. in your ,,(l1anual for future reference.
SERIAL NO. ------------,-
MODEL NO. __________ ___

Jet JCS-10 Specifications

General

Blade Diameter	250 mm
Motor Power	1.5 kW
Table Size	635 x 460 mm
Weight	45 kg
Maximum Depth of Cut at 90 Degrees	80 mm
Maximum Depth of Cut at 45 Degrees	55 mm
Max Cutting Depth at 90°	80 mm
Max Cutting Depth at 45°	55 mm
No-load Speed	4000 rpm