4.0 Features – JWL-1221SP lathe
Figure 4-1
1. Spindle handwheel
2. Index pin
3. Speed chart
4. Upper pulley access door
5. Headstock
6. Bed
7. Live center
8. Tailstock
9. Tailstock handwheel
10. Motor 3/4HP
11. Warning label
12. Lower pulley access door
13. Tool caddy
14. Faceplate
15. Spur center
16. Tool rest
17. Tool rest locking handle
18. Quill locking handle
19. Tailstock locking handle
20. On/off switch with safety key
21. Tool rest base
22. Tool rest base locking handle
23. Belt tension release lever
To Next Page
Loading...
