8
Weights
Net weight 52 kg (115 lbs.)
Shipping weight 56 kg (123.5 lbs.)
1
Subject to local/national electrical codes. Recommendation based upon dedicated circuit.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
5.1 Mounting hole pattern – JWL-1221SP lathe
Figure 5-1
Clearance hole spacing for mounting lathe
To Next Page
Loading...
