Jetmaster 18f - Door Tension Adjustment; Cleaning and Maintenance; Glass Door

Door Tension Adjustment
After carrying out any servicing on the door always adjust the door latch tension. The latch tension is adjusted
by adding or removing the shim washers behind the door latch.
Thiswilladjustthetensionofthedoorsealagainstthereboxbody.
Cleaning and Maintenance
Tomaintainthenishwipewithasoftdampclothonly.Do not use abrasive cleaners, polish or solvents as these
candamagethesurfacenish.
Thevisiblefrontpartsoftherecanberepaintedwithheatresistantblackpaint.Thesepartscanberepainted
every1or2yearsasrequiredbutgenerallydustingwithasoftbrushshouldkeeptherelookinggood.The
interiorofthereboxandthegrateshouldnotbepainted.
Glass Door
If over a period of time the glass door starts to soot then this maybe cleaned with a proprietary cleaner available
from your distributor.
ALL CLEANING MUST BE CARRIED OUT WITH THE APPLIANCE COLD
31