Jetmaster 18f - Important Points to Note before Starting Installation; Paint; Installation Requirements; Unpacking

Important Points to Note before Starting Installation.
Paint
Itisstronglyrecommendedthatthereisprotectedfromcementandplastersplashesduringinstallation,as
thesearedifculttoremovefromthesurfaces.
Installation Requirements
Thesurfaceofthehearthandreplaceoormustbesufcientlyattoensurethatthestovecanstandlevel.Any
excessiveunevenness(uneventiles,stone,etc.)shouldberectied.Thereareadjustablefeetateachcorner
of the stove to take up any small deviations in level.
The appliance must not stand on combustible materials or carpets.
Unpacking
Takecarewhenunpackingtheretoavoidaccidentaldamage.Particularcareshouldbetakenwiththeglass
door and the air control mechanism.
Ensure that all the listed items are present before commencing installation.
●
Stove Body
●
Board Set
●
Log Retainer
●
Legs x 4
●
Leg Bolts x 4
●
Door operating tool
●
Installation & Operating Instructions
●
Guarantee card
Not supplied as standard:
●
Log Box
●
Heat Shield
●
Long Leg Option
Leg Length 155mm
7
●
Optional external air kit
consisting of:
1. Flexible air pipe
2. Adaptor Sleeve
3. Clamp