3. FROM THE HOLE ON THE LEFT SIDE, INSERT THE BOLT THROUGH BACK LEG OF THE FRONT FORK BY TWISTING IT IN
CLOCKWISE UNTIL THE TIP OF THE BOLT EMERGES THROUGH THE RIGHT SIDE.
4. TWIST NUT CLOCKWISE ONTO THE TIP OF THE BOLT. HOLD THE NUT STEADY WHILE YOU TIGHTEN THE BOLT INTO IT BY
TURNING THE BOLT CLOCKWISE WITH THE PHILLIPS-HEAD SCREWDRIVER.
5. CHECK THAT THE FORK IS SECURE.
BOLT
NUT
PHILLIPS-HEAD
SCREWDRIVER
FRONT FORK (B)
FRAME (A)
3
4
5
To Next Page
Loading...
