Jetson Volt X - Making Moves; Fastening the Seat Belt

54
IMPORTANT: ALWAYS FASTEN THE SEAT BELT PRIOR TO EVERY RIDE.
1. POSITION BOTH STRAPS OF THE SEAT BELT OVER THE LAP OF THE RIDER.
2. CLICK THE INSERTION CLIP INTO THE RECEIVING CLIP.
3. CHECK THAT THE BELT IS SECURE AND SNUG OVER THE RIDER’S LAP. IF NECESSARY, SHORTEN OR LENGTHEN THE BELT BY
MOVING THE ADJUSTMENT SLIDE BUCKLE ALONG THE STRAP.
3.1 Fastening the Seat Belt
3. Making Moves
INSERTION
CLIP
ADJUSTMENT SLIDE
BUCKLE
RECEIVING
CLIP
SEAT BELT
TO RELEASE THE SEAT BELT:
1. WHILE SQUEEZING THE SIDES OF THE INSERTION CLIP, SLIDE THE INSERTION CLIP OUT OF THE RECEIVING CLIP.