2. SLIDE THE LARGE WASHER ONTO THE RIGHT SIDE OF THE FRONT AXLE.
3. WITH THE SIDE OF WHEEL THAT HAS THE TAB SLOTS FACING AWAY FROM THE FRAME,
SLIDE 1 FRONT WHEEL (J) ONTO THE AXLE.
4. SLIDE THE MEDIUM WASHER ONTO THE END OF THE AXLE.
5. TWIST AN AXLE NUT CLOCKWISE ONTO THE TIP OF THE AXLE.
6. TIGHTEN THE AXLE NUT BY TURNING IT CLOCKWISE WITH THE SOCKET WRENCH.
7. REPEAT STEPS 1-6 ON THE LEFT SIDE OF THE AXLE WITH THE OTHER FRONT WHEEL.
IMPORTANT: DO NOT OVERTIGHTEN THE NUTS. OVERTIGHTENING CAN CAUSE DAMAGE TO THE WHEELS.
AXLE NUT
FRONT WHEEL (J)
SOCKET WRENCH
FRONT AXLE
FRAME
LARGE
WASHER
MEDIUM
WASHER
TAB SLOT
To Next Page
Loading...
