JETStream 3000 series - Training; Safety Training; New Start-Up Training; FS Solutions Training

Bareshaft Pump
71
TRAINING
Safety Training
Only trained personnel may setup, operate, or main-
tain this equipment.
Waterblast operators must be aware of the dangers
that exist while using water blasting equipment. The
cleaning nozzle’s discharge jet(s) can inict serious
bodily injury. Jetstream
®
recommends demonstrating
to new operators the potential damage of the dis-
charge jet(s). This can be done by showing the effect
of a waterjet from a straight tip nozzle cutting a scrap
piece of 2 in. x 4 in. (50 mm x 100 mm) wood.
A safety training DVD is available from Jetstream
®
at
their website (www.waterblast.com).
Training materials are also available from the Water
Jet Technology Association (WJTA) (www.wjta.org).
New Start-up Training
In order to ensure
customer satisfaction,
Jetstream has
developed the Right
Start program, a four-step plan designed to provide
the owners and operators of new Jetstream waterblast
units with the knowledge and support needed to feel
familiar, condent and satised with Jetstream equip-
ment and personnel.
1. Transportation
Once a new waterblaster is built
and thoroughly tested, the Shipping
Manager contacts the new owner to
arrange for the unit’s arrival to the right
place at the right time.
2. Training
All new waterblasters include personal
training by the Right Start Technician.
Training involves both classroom and
“hands-on” instruction to make sure that
each operator is thoroughly familiar with
the design and function of the unit and
accessories, enabling him to safely put
the new equipment to optimal use.
3. Follow-up
Within thirty days of delivery, and again
within sixty days, the Solutions Provider
will call to answer any questions and
ensure complete satisfaction.
4. Trust
If any questions or problems arise,
the Jetstream team is available and
committed to providing prompt answers
and solutions.
FS Solutions Training
FS Solutions training begins where Right Start training
stops. Our certied training covers all skill levels and
incorporates: safety, application, troubleshooting, and
eld maintenance training.
For more information contact Jetstream.
Additional Training Opportunities
Jetstream offers multiple certied training classes
designed to promote safe, effecient, and protable
operation.
For more information on any of the other available Jet-
stream training opportunities please contact Jetstream
at 1-800-231-8192 or visit us at www.waterblast.com.