4
GENERAL INFORMATION
(6)Safe operation
Be careful in operation to avoid accident or get a
burn by the engine, exhaust pipe and silencer..
Always think of the right tools, right ways, right
fixture and the right position to ensure body's steady.
(7)The operation should be broken down in order and
the taken apart parts should be sort out in time.
Unscrew: from offside to inside on a cross by 2 or
3 times.
Check and measure the important parts while
breaking down, and keep the records for reference
The disassemble parts should be put in order to
prevent mix and loss.
The parts of the engine transmission must be
cleaned by oil and dried by compressed air after
knocked down.
(8)Defer to each part to confirm while assembling.
Screw down: from inside to offside on a cross by 2 or
3 times.
Defer to each part's correct results and the data
before broken down during the operation.
Do not let dust sticks on various components in
assembly
Smear motor oil on rotary and sliding parts (smear
grease on oil seal and O-rings). Make sure to follow
the screw moment method.
Two persons should cooperation perfectly when
work in with each other.
(9)Maintenance manual and parts catalog is necessary
Maintenance manual and parts catalog is necessary.
For efficiently, reliable and safe operation.
To Next Page
Loading...
Need help?
General