JIYI K++ User Manual

1). Basic sensitivity setting
Basic sensitivity includes roll correction, roll damping, pitch
correction, pitch damping, yaw, and vertical. It is mainly used to
adjust and adapt to the rack. The function definition of each
sensitivity is shown in the table.
Basic sensitivity debugging steps:
a. First adjust the vertical sensitivity, adjust it under no-load conditions, and slowly
increase the vertical sensitivity until the aircraft twitches up and down, and then
adjust the sensitivity back to no twitch.
b. Adjust the roll / pitch damping sensitivity again, and slowly adjust it from low to
high according to 10%, until the aircraft appears high frequency jitter or the motor

JIYI K++ Specifications

General

Brand	JIYI
Model	K++
Category	Controller
Language	English