positioning accuracy to meet the requirements. As shown in the
figure below, when the LED indicates that the GPS status is normal
GPS signal, GPS signal is good, or RTK positioning, you can
unlock or enter this mode in this mode.
Flight control can only be unlocked in attitude mode, other modes
cannot be unlocked. After entering the attitude mode, the LED
flashes green.
2). Operating instructions
After the GPS search is over, after the positioning is successful,
the remote control switches the 5-channel mode switch to the
attitude mode position. After the joystick is unlocked, the throttle
motor below 50% is at idle speed. When the throttle is more than
50%, the throttle is gently pushed to take off and the throttle lever is
set to 50 At the% position, the aircraft is fixed. When the aircraft is
in motion, all the joysticks of the remote control are returned to the
center, and the aircraft will automatically brake and hover.
The corresponding functions of the joystick are as follows
2.Manual operation mode
Manual operation mode, also known as GPS mode, IMU, GPS,
magnetic compass and barometer participate in the process of
flight. This mode has imitation ground function.
To Next Page
Loading...
Need help?
General
