1). Working conditions
The working conditions are the same as the attitude mode. It
cannot be unlocked in this mode. You need to switch to this mode
first after unlocking in attitude mode. After entering the manual
operation mode, the green LED flashes twice.
2). Operating instructions
After unlocking in attitude mode, the remote controller switches the
5-channel mode switch to the manual operation mode position, and
when the throttle stick is set to the 50% position, the aircraft sets
the height and the fixed point. When the aircraft is in motion, all the
joysticks of the remote control are returned to the center, and the
aircraft will automatically brake and hover.
3.AB operation mode
AB operation mode, that is, AB execution, U-shaped operation is
performed through the AB point set by the user, as shown in the
figure.
1). Working conditions
Before using this mode, you need to connect the assistant software
to set the channel.
To Next Page
Loading...
Need help?
General
