4). AB point lengthening and shortening
K ++ supports extending and shortening AB points during flight.
When flying from point A to point B: push the pitch stick upwards,
point B stretches forward, push the pitch rod down, and point B
shortens backwards;
When flying from point B to point A: push the tilt stick up, point A
shortens backwards, push the tilt stick down, and point A shortens
backwards.
4. Route operation mode
Flight route operation mode, that is, the flight controller will
autonomously operate the plot after planning the land through the
mobile APP and adjusting the flight route.
1). Working conditions
After the star search is completed and the positioning accuracy
meets the requirements (the LED does not flash red or the red light
flashes single), click on the execution job in the APP execution job
interface. After setting the parameters, the flight control will
automatically unlock and take off. After entering the route
operation mode, the green LED flashes four times.
2). Operating instructions
To Next Page
Loading...
Need help?
General
