2). Execution
In attitude mode and GPS mode, when the remote control pump
control channel switch is turned on, the pump will start working,
and when it is turned off, the pump will be turned off.
Note: The AB operation mode and the route operation mode are controlled by the
flight control autonomously.
17.Water pump linkage control function
K ++ supports the pump linkage control function, that is, when the
pump is turned on, the flow rate of the pump corresponds to the
horizontal flight speed of the aircraft. The faster the speed, the
greater the flow.
Attitude mode and GPS mode Click "Spray" in the upper right
corner of the APP to select the spray mode as linkage, set the spray
opening and full spray opening, and turn on the water pump switch
when the hand is flying to achieve the pump linkage control.
To Next Page
Loading...
Need help?
General
