Firmware Version 3.5 Factory Field Installation
24-10025-199 Rev. –
11
8. When the load#.bat procedure is completed, launch Tera Term Pro
soon after to establish a serial port session to the CK721-A controller.
9. Using the previously opened command prompt window, type the
following command and press <Enter>:
cd c:\ftp\ck721a\step2
10. Transfer the CK721-A controller Firmware Update files to the
CK721-A controller. To do so, in the command prompt window enter
the following command and press <Enter>:
step2a
A message appears displaying information about the transfer
process.
Note that file size or transfer time may be different on from the
following example.
To Next Page
Loading...
