Firmware Version 3.5 Factory Field Installation
24-10025-199 Rev. –
17
Use the following table to track your settings:
CK721-A V
ERSION 3.5 DATABASE DOWNLOAD
After you reconnect the CK721-A to the P2000 host (controller is online),
download all databases to the controller. Refer to the P2000 Software User
Manual and the CK721-A Software Release Notes for details.
The controller is now ready for normal operation.
To ensure that the downloaded databases remain in the controller in the case of
a power and battery failure, you may want to invoke the controller’s write to
flash feature. After writing to flash, the controller will reboot. Refer to the
P2000 Software User Manual for details on how to invoke the controller’s
write to flash feature.
Table 2: Panel Settings
Panel Settings Current Operational Settings Default Settings
Controller IP Address* 192.168.2.2
Subnet Mask* 255.255.255.0
Primary Host IP Address* 192.168.2.1
Download Port* 41014
Upload Port Number* 41013
Priority Port Number* 41012
Encryption (Y/N)* N (disabled)
Key* No key (all zeros)
Controller Password** master
Route Information*** No route information
* To be found in Panel Parameters Data Entry screen (Main Menu > Panel).
Use <Page Down> to access Encryption and Key settings.
** Configured from Main Menu > Password Change.
*** To be found in Route Configuration Screen (Main Menu > Route Info).
To Next Page
Loading...
