Wired Controller DWCR2
12
3.7.1 Sleep Function Setting
Enter user function page, and press “ ” “ ∧ or ∨” button to select sleep function,
and press “
＜
” or “
＞
” button to turn on or turn off sleep function with auto saving.
If this function is turned on, the unit will operate according to the preset sleep
curve to provide a comfortable sleep environment.
Note:
① In
fan or auto mode, the sleep function is not available;
② Sleep function is canc
eled when turning off the unit or switching modes.
To Next Page
Loading...
