Accessories
See Table 9 for controller accessories ordering
information.
Table 9: Accessories Ordering Information
DescriptionProduct Code Number
Bluetooth Commissioning Converter, with Bluetooth® TechnologyFX-BTCVT-1
Local Controller Display (for use with FX-PCG1611 model only)FX-DIS1710-0
Wireless Field Bus RouterFX-ZFR1811-0
Transformer, 120 VAC Primary to 24 VAC secondary, 20 VA, Wall PlugTP-2420
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount,
8 in. Primary Leads and Secondary Screw Terminals, Class 2
Note: Additional Y6x-x Series transformers are also available. Refer to the Series
Y63, Y64, Y65, Y66, and Y69 Transformers Product Bulletin (LIT-125755) for more
information.
Y65T31-0
Power transformer (Class 2, 24 VAC, 50 VA maximum output), no enclosureAS-XFR050-0
Replacement SA Bus Terminal Blocks, 4-Position, Brown, Bulk PackAP-TBK4SA-0
Replacement FC Bus Terminal Blocks, 4-Position, Blue, Bulk PackAP-TBK4FC-0
Replacement Power Terminal Blocks, 3-Position, Gray, Bulk PackAP-TBK3PW-0
USB Dongle with ZigBee® Driver provides a wireless connection through FX-PCT
to allow wireless commissioning of the wirelessly enabled FX-PCG, FX-PCA,
FX-PCX, and FX-PCV field controllers. Also allows use of the FX-ZFR Checkout
Tool (FX-ZCT) in FX-PCT.
Note: The ZFR-USBHA-0 replaces the IA OEM DAUBI_2400 ZigBee USB dongle.
For additional information on the ZFR-USBHA-0 ZigBee dongle, refer to the FX-ZFR
Series Wireless Field Bus System Technical Bulletin (LIT-12011660) or FX-ZFR
Series Wireless Field Bus System Quick Reference Guide (LIT-12011696).
ZFR-USBHA-0
Technical Specifications
Table 10: FX-PCG Technical Specifications
FX-PCG16x1-x General Purpose Programmable Controller
Controller
FX-PCG1621-0-x Controller with Display and Push-button User Interface
Product Code Numbers
24 VAC (nominal, 20 VAC minimum/30 VAC maximum), 50/60 Hz, power supply
Class 2 (North America), Safety Extra-Low Voltage (SELV) (Europe)
Supply Voltage
14 VA maximum for FX-PCG1611 only
20 VA maximum for FX-PCG1621 (with integral display) only
Note: VA rating does not include any power supplied to the peripheral devices
connected to Binary Outputs (BOs) or Configurable Outputs (COs), which can
consume up to 12 VA for each BO or CO; for a possible total consumption of an
additional 84 VA (maximum).
Power Consumption
Operating: 0 to 50°C (32 to 122°F); 10 to 90% RH noncondensing
Storage: -40 to 80°C (-40 to 176°F); 5 to 95% RH noncondensing
Ambient Conditions
DIP switch set; valid controller device addresses 4–127 (Device addresses 0–3 and
128–255 are reserved and not valid controller addresses.)
Controller Addressing for BACnet
MS/TP
DIP switch set; valid control device addresses 1-255Controller Addressing for N2
23FX-PCG16 General Purpose Programmable Controller Installation Instructions
To Next Page
Loading...
Need help?
General
