Johnson Controls RSH Series User Manual

FORM 145.16-IOM2 (0611)
4 JOHNSON CONTROLS
-
Product Category Service Digit
RP = Water-Source HP R-22 A = None
RS = Water-Source HP R-410A Future
Miscellaneous Options
A = None
V = Vertical Arrangement (Upflow)
H = Horizontal Arrangment
Heating Options
0 = None
007 = .5 TON
Waterside Options
009 = .75 TON
Design Series
A = Std Water coil
012 = 1 TON A = Current B = Insulated Water Coil
018 = 1.5 TON B = Future N = Cupro-nickel Water Coil
024 = 2 TON C = Future R = Cupro-nickel & Insulation
030 = 2.5 TON
036 = 3 TON
042 = 3.5 TON
VOLTAGE
048 = 4 TON 1 = 208/230-60-1
060 = 5 TON 2 = 208/230-60-3
Air-side Options
070 = 6 TON 4 = 460-60-3
A = Std Air-Side coil
5 = 575-60-3 C = Corrosion Protective Coating
6 = 265-60-1 D = Stainless Steel Drain Pan
F = Coated Coil w / S-S Drain Pa n
Control Options
M =Standard Microprocessor Control
Supply Air Options
N = Microprocessor Control with CSS Interface S = Straight-Thru (Horizontal Only)
B = Back Discha rge (Horizontal Only)
T = Top Discharge (Vertical Only)
Return Air/Unit Orientation
L = Left Hand
R = Right Hand
WATER-SOURCE HEAT PUMP - PRODUCT NOMENCLATURE
Nominal Capacity
A L S AE A
Product Indentifier
RS 018 0 A AH 2

Johnson Controls RSH Series Specifications

General

Brand	Johnson Controls
Model	RSH Series
Category	Heat Pump
Language	English