Johnson Controls SE-ZEC510-1 User Manual

Smart Equipment Controls
Installation, Operation and Maintenance Manual
Form No. SECIOM.A
Effective Date: 07/05/19
Page 17
4. Log in to the MAP Gateway
a. Log in to the MAP Gateway using the default Admin login credentials found in the MAP Gateway Quick
Start Guide that is provided with the MAP Gateway (Part No. 24-10737-16)
5. Change Passwords
a. The first time you log in to the MAP Gateway, the Change Password and Passphrase web page appears.
You must change the Admin password and Wi-Fi passphrase.
After you change the Wi-Fi passphrase or
SSID, the web server restarts and you must rejoin the MAP Gateway Wi-Fi network using the new
passphrase. On some mobile devices, you must select and forget the original MAP Gateway Wi-F
i
network before rejoining the network with the new passphrase.
6. Use the MAP Gateway
a. Select a device from the equipment list and use the web pages from the MAP Gateway to view,
commission and configure devices as needed.
For more information on the MAP Gateway reference the following Johnson Controls documents:
Installation Instructions: LIT-24-10737-8
Catalog Page: LIT-1900869
User’s Guide: LIT-12011999
Product Bulletin: LIT-12011884
Technical Bulletin: LIT-12012015
VAV Handheld Balancing Tool
A Handheld Balancing Tool (Part # 15037701) can be used to aid in balancing units with SE-ZEC Controllers.
1. Connect the VAV Balancing Tool to the Network Zone Sensor associated with the controller you want to balance.
2. Press and hold the Enter and Cancel buttons on the VAV Balancing Tool for 5 seconds to enter balancing mode.
3. Balance the unit. Reference the Metasys Balancing Sensor User Guide that comes with the VAV Handheld
B
alancing Tool.
Parameters that can be balanced include:
Cooling Ma
x Flow [CMAX]
Cooling Min Flow [CMIN]
H
eating Flow [HTG]
Differential Flow [DIFF]
Box Area [AREA]
Pickup Gain – K Factor [K]
dP Offset [DPO]
4. T
o Exit, Press the enter button when Exit appears on the screen at the highest sub menu.
For more information on the VAV Handheld Balancing Tool reference the following Johnson Controls documents:
Catalog Page: LIT-1900348
Installation Instructions: LIT-24-10211-2
User Guide: LIT-24-10159-5
Troubleshooting
Use the following information to troubleshoot the SE-ZEC Controllers. *NOTE: Please use the appropriate personal
protective equipment when troubleshooting.

Johnson Controls SE-ZEC510-1 Specifications

General

Brand	Johnson Controls
Model	SE-ZEC510-1
Category	Controller
Language	English