Johnson Controls YORK - Knocked-Down Unit Component Dimensions - Condenser

Knocked-down unit component dimensions - condenser
Figure 10: Condenser section dimensions
Table 6: Condenser section dimensions
Dimensions ft-in (mm)
Unit model compr/shells
A B C
H9/Q shells 16' 0" (4877) 5' 0" (1524) 7' 4" (2235)
H9/R shells 16' 0" (4877) 5' 3" (1600) 7' 7" (2311)
K1/L shells 18' 0" (5486) 5' 3" (1600) 7' 8" (2337)
K2/M shells 22' 0" (6706) 5' 3" (1600) 7' 8" (2337)
K2/B shells 18' 0" (5486) 5' 5" (1651) 8' 0" (2438)
K3/C shells 22' 0" (6706) 6' 2" (1880) 8' 8" (2642)
K3/D shells 18' 0" (5486) 6' 7" (2007) 9' 6" (2896)
K4/E shells 22' 0" (6706) 6' 7" (2007) 9' 6" (2896)
K4/F shells 18' 0" (5486) 6' 10" (2083) 10' 0" (3048)
K7/K shells 22' 0" (6706) 7' 8" (2337) 9' 10" (2997)
Note: For knocked-down shipment, add the associated dimension for compact or marine
waterboxes to the shells.
Centrifugal Liquid Chillers24