Johnson Controls YORK - Knocked-Down Unit Component Dimensions - Driveline

Knocked-down unit component dimensions - driveline
Figure 11: Driveline section dimensions
Table 8: Driveline section (two)
Dimensions, ft-in (mm)
Unit model compressor
A B C
H9 12' 0" (3658) 6' 6" (1981) 7' 0" (2134)
K1 10’ 9” (3277) 6’ 6” (1981) 7’ 8” (2337)
K2 10’ 9” (3277) 6’ 6” (1981) 7’ 8” (2337)
K3 11’ 3” (3429) 6’ 10” (2083) 7’ 8” (2337)
K4 11’ 3” (3429) 6’ 10” (2083) 7’ 8” (2337)
K7 13’ 0” (3962) 7’ 0” (2134) 7’ 0” (2134)
Note: For knocked-down shipment, the diagram above is missing the suction/discharge
elbows - consider these items as well as there being two drivelines for each YD chiller.
27Centrifugal Liquid Chillers