32 - 40
cube
31
OFF
28
29
30
Fig. 31: Unpack the new ionizing tubes
from their packaging, handling them
carefully as they are fragile.
Fig. 28: Switch the ioniser off by
switching the On/Off button to O.
Put the device on a flat surface. Remove
the plug connected to the mains.
Fig. 29: Remove the lid by pulling it
upwards.
Fig. 30: Gently unscrew the ionising tubes
by acting on the glass surface that can be
reached by hand through the special slots.
The codes for ordering
components subject to wear
are given in paragraph 4.1.2
"Spare parts available on
order".
To Next Page
Loading...