22 – English
Maintenance
Check the safety system
The machine is equipped with a safety system that prevents
starting or driving under the following conditions.
The engine should only be possible to start when the cutting
unit is in its r
aised position and the gear shift lever or hydrostat
pedals are in the neutral position.
The driver does not need to be seated in the driver’s seat.
Make daily inspections to ensure that the safety system works
b
y attempting to start the engine when one of the conditions
is not met. Change the conditions and try again.
Check that the engine stops if you temporarily move out of the
dr
iver’s seat while the cutting unit is lowered or the gear shift
lever/hydrostat pedals are not in the neutral position.
Start motor
Ignition system
Works
Does not work
To Next Page
Loading...
