English – 31
TECHNICAL DATA
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Jonsered FR 2216 FA and FR 2218 FA
4X4 from 2010’s serial numbers and onwards (the year is clearly stated in plain text on the rating plate with subsequent serial
number), complies with the requirements of the COUNCIL’S DIRECTIVE:
of May 17, 2006 "relating to machinery"
2006/42/EC
of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
of May 8, 2000 ”relating to the noise emissions in the environment”
2000/14/EC.
Information regarding noise emissions and the mowing width, see Technical data
The following harmonised standards have been applied:
EN ISO 12100-2, EN-836.
0404, SMP Svensk Maskinprovning AB
, Fyrisborgsgatan 3, SE-754 50 Uppsala, has issued reports regarding the assessment
of conformity according to annex VI of the COUNCIL’S DIRECTIVE of May 8, 2000 ”relating to the noise emissions in the
environment” 2000/14/EC.
The certificates have the numbers: 01/901/092, 01/901/093, 01/901/097, 01/901/098
Huskvarna December 29, 2009
Claes Losdahl, Development Manager/Garden Products (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Jonsered FR2218 FA 4x4 and FR2216
FA up until 2010’s serial numbers (the year is clearly stated in plain text on the rating plate with subsequent serial number),
complies with the requirements of the COUNCIL’S DIRECTIVE:
of June 22, 1998 ”relating to machinery”
98/37/EC, annex IIA.
of December 15, 2004 ”relating to electromagnetic compatibility”
2004/108/EC.
of May 8, 2000 ”relating to the noise emissions in the environment”
2000/14/EC.
Information regarding noise emissions and the mowing width, see Technical data
The following harmonised standards have been applied:
EN ISO 12100-2, EN-836.
Notified body:
0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, has issued reports regarding the assessment
of conformity according to annex VI of the COUNCIL’S DIRECTIVE of May 8, 2000 ”relating to the noise emissions in the
environment” 2000/14/EC.
The certificates have the numbers: 01/901/092, 01/901/093, 01/901/097, 01/901/098
Huskvarna 13 October 2009
Claes Losdahl, Development Manager/Garden Products (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
Cutting unit JC 103 JC 112
Cutting width, mm/inch 1030 / 41 1120 / 44.1
Cutting heights, 7 positions, mm/inch 25-75/0.98-2.95 25-75/0.98-2.95
Blade length, mm/inch 388/15.28 420 / 16,5
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs.
The warranty is not valid if non genuine parts are used.
To Next Page
Loading...
