Jorvik Jet-E1 - Page 13

Jorvik JMT Mid Drive Electric Mountain Trike
Page | 13
Fing the Pedals
Apply a small amount of grease onto the
pedal threads.
NOTE: You will see either “L” or “R” on the
end of the pedal thread. The “R” is for the
righthand pedal and needs to be turned
clockwise to ghten and the “L” or lehand
pedal Counterclockwise to ghten. Incorrect
ng can damage your crank.
Use a 15mm spanner to ghten the pedals
rmly.