Fing the Saddle
Apply a small amount of grease into the seat tube or boom of the seat post. Release the seat clamp lever and insert the seat post
into the tube and slide up and down to make sure it moves freely.
Clamp the seat post by moving the lever back to the closed posion. It should require rm pressure (enough to leave a small
imprint on the palm of your hand to close. Check the seat height so that when the pedals are set the furthest down your leg has a
slight bend.
If the seat moves when weight is put on it open the clamp and adjust the nut on the opposite side clockwise to add to the
clamping force. Adjust in ¼ turns unl the seat is secure.
Do not exceed minimum inseron mark.
To Next Page
Loading...
