Jorvik JMT Mid Drive Electric Mountain Trike
Page | 37
Check that gears are aligned correctly. Set shier
is in 4th and see if the yellow indicator is in line
on the hub.
Bearings worn or over
ghtened.
First remove the wheels tap the axle with a
wooden mallet to reseat the axle in the
bearings. Reinstall the wheel.
Aer a length of me the bearings may need
replacing. Contact a reputable cycle shop to get
the bearings replaced. The bearings are 6203RS
sealed units and up to 4 may be required.
Wheels do not spin freely
Front wheel not in dropouts
correctly.
Brakes dragging.
Front: Check that the wheel is straight in the
dropout. Undo the Quick Release while the front
wheel is on the ground li the fork slightly (just
enough to take the weight o the axle) and let it
drop gently fully down on the wheel axle look
from the front and ghten the Quick Release
correctly.
To Next Page
Loading...
