10
|
Arm-type Fully Automatic Blood Pressure Monitor DBP-6191
. Testing
1. Power On
Press “START/STOP” button to turn the unit on. The LCD screen will
appear for one second as unit performs a quick diagnosis.
Note: Unit will not function if residual air from previous testing is
present in cuff. The LCD will flash until pressure is stabilized.
mmHg
2. Testing
After cuff inflation, air will slowly rise as indicated by the corre-
sponding cuff pressure value. A flashing will appear simulta-
neously on screen signaling heart beat detection.
Note: Keep relaxed during testing. Avoid speaking or moving body
parts.
mmHg
3. Result Display
The screen will display measurements for systolic and diastolic blood
pressure . An indicator representing the current measurement will
appear next to the corresponding WHO Classification.
Note: Refer to Page 44 for detail WHO Blood Pressure Classification
Information.
mmHg
. Irregular Heartbeat Indicator
If the monitor detects an irregular heart rhythm two or more times during the meas-
uring process, the Irregular Heartbeat Symbol (( )) appears on screen along with
measurement results. Irregular heartbeat rhythm is defined as rhythm that is either
25% slower or faster than the average rhythm detected while measuring systolic blood
pressure and diastolic blood pressure. Consult your physician if the Irregular Heartbeat
Symbol (( )) frequently appears with your test results.
To Next Page
Loading...
