16
|
Arm-type Fully Automatic Blood Pressure Monitor DBP-6191
Note: Abnormal test results may be caused by:
1. Improper cuff placement
Make sure cuff is snug-not too tight or too loose.
Make sure bottom of the cuff is approximately 1–2cm (1/2’’) above the elbow joint.
2. Improper body position
Make sure to keep your body in an upright position.
3. Feeling anxious or nervous
Take 2–3 deep breaths, wait a few minutes and resume testing.
Q: What causes different readings?
A: Blood pressure varies throughout the course of a day. Many factors including diet,
stress, cuff placement, etc. may affect an individual’s blood pressure.
Q: Should I apply the cuff to the left or right arm? What is the difference?
A: Either arm can be used when testing, however, when comparing results, the same
arm should be used. Testing on your left arm may provide more accurate results as
it is located closer to your heart.
Q: What is the best time of day for testing?
A: Morning time or any time you feel relaxed and stress free.
. MAINTENANCE
Avoid dropping, slam-
ming, or throwing the
unit.
Do not use petrol, thin-
ners or similar solvents.
Avoid extreme temper-
atures. Do not expose
unit directly under sun-
shine.
Remove batteries when
not in operation for an
extended period of time.
Do not disassemble
product.
To Next Page
Loading...
