|
19ENGLISH
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
This marking shown on the product indicates that it should not be disposed with other household waste at the end
of its life. To prevent potential harm to the environment or to human health, please separate this product from other
types of wastes and recycle it responsibly. When disposing this type of product, contact the retailer where product
was purchased or contact your local government office for details regarding how this item can be disposed in an
environmentally safe recycling center.
Business users should contact their supplier and check the terms and conditions of the purchasing agreement. This
product should not be mixed with other commercial wastes for disposal. This product is free of hazardous materials.
. ELECTROMAGNETIC COMPATIBILITY INFORMATION
The device satisfies the EMC requirements of the international standard IEC 60601-1-2.
The requirements are satisfied under the conditions described in the table below. The
device is an electrical medical product and is subject to special precautionary measures
with regard to EMC which must be published in the instructions for use. Portable and
mobile HF communications equipment can affect the device. Use of the unit in con-
junction with non-approved accessories can affect the device negatively and alter the
electromagnetic compatibility. The device should not be used directly adjacent to or
between other electrical equipment.
Table 1
Guidance and declaration of manufacturer-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
Radiated emission CISPR 11 Group 1, class B. The device uses RF energy only for its internal function.
Therefore, its emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Conducted emission CISPR 11 Group 1, class B. The device is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic emissions IEC 61000-3-2 Klasa A
Voltage fluctuations/flicker
emissions IEC 61000-3-3
Complies
Table 2
Guidance and declaration of manufacturer-electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such an environment.
IMMUNITY test IEC 60601 test
level
Compliance
level
Electromagnetic environment – guidance
To Next Page
Loading...
