18
|
Arm-type Fully Automatic Blood Pressure Monitor DBP-6191
Battery Life Approximately 2 months at 3 tests per day
Unit Weight Approx.188 g (6.63 oz) (excluding battery)
Unit Dimensions Approx. 136×94,5×57mm (5.35" × 3.72" × 2.24")(L× W× H)
Cuff Circumference Approx. 135 × 485 mm (W× L)
(Cuff size M/L: fits arm circumference 22–42 cm)
Operating Environment Temperature 10–40ºC (50–104ºF)
Humidity 15–93% RH
Pressure 800–1060 hPa
Storage Environment Temperature −25–55ºC (−13–131ºF)
Humidity ≤93% RH
Classification:
Internal Powered Equipment, Type BF ,Cuff is the Applied Part
Ingress Protection Rating: IP21, Indoor Use Only
Specifications are subject to change without notice.
This Blood Pressure Monitor complies with the European regulations and bears the CE
mark“CE 0197”.This blood pressure monitor also complies with mainly following standards
(included but not limited):
Safety standard:
EN 60601-1 Medical electrical equipment part 1: General requirements for safety
EMC standard:
EN 60601-1-2 Medical Electrical Equipment -- Part 1-2: General Requirements For Basic
Safety And Essential Performance -- Collateral Standard: Electromagnetic Disturbances
– Requirements And Tests.
Performance standards:
IEC 81060-2-30, Medical electrical equipment – Part 2-30: Particular requirements for the
basic safety and essential performance of automated non-invasive sphygmomanometers.
EN 1060-3 Non-invasive sphygmomanometers – Supplementary requirements for elec-
tromechanical blood pressure measuring systems.
EN 1060-4 Non-invasive sphygmomanometers – Test procedures to determine the overall
system accuracy of automated non-invasive sphygmomanometers.
ISO 81060-2, non-invasive sphygmomanometers – part 2: clinical validation of automated
measurement type.
To Next Page
Loading...
