EasyManuals Logo

JPT YDFLP-E-80&100-M7-M-R User Manual

JPT YDFLP-E-80&100-M7-M-R
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
YDFLP-E-80&100-M7-M-R User Manual
19
File Number: JG-MCYF-SM-0039
Laser priority: Laser is prior when laser and red beam are mutually exclusive.
Red priority:Red beam is prior when laser and red beam are mutually exclusive.
Laser priority and red beam switching on:Laser and red beam are mutually exclusive.
Red beam is enabled by default setting when there is no laser emission(*password is required for
this setting).
Default parameter setting and mode selection
E-type software can modify laser default parameter setting and selection in the option of
"Parameter setting" and “mode selection”. The parameter settings take effect immediately and
save automatically after power down.
Figure 21 Default parameter settings and mode selection
Lock PRR: Laser will lock to GUI setting frequency.
Default pulse: The laser will use GUI default pulse when no pulse width control command
received.
Simmer
Can be used for controlling the height of the first pulse, the higher the value, the larger
the first pulse. Setting range: 0-1000
Simmer setting examples:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JPT YDFLP-E-80&100-M7-M-R and is the answer not in the manual?

JPT YDFLP-E-80&100-M7-M-R Specifications

General IconGeneral
BrandJPT
ModelYDFLP-E-80&100-M7-M-R
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals