ii
Warning Symbols
The warning labels in the instruction manual and on the system use various
symbols to ensure that the system is used correctly and prevent personal
injury or equipment damage. The symbols and their meanings are shown
below.
Before continuing, please read and understand the following symbols.
Examples
About the warning label
The warning label is pasted on main control unit (NCK-175). Please never
detach the warning label, and do damage and the modification.
This indication is shown where any person is supposed to be in
danger of being killed or seriously injured if this indication is neglected
or equipment is not operated correctly.
△
marks indicate CAUTION (including DANGER and WARNING).
Detailed contents of CAUTION (“Electric Shock” in the example on
left) are shown in the mark.
marks indicate prohibition.
Detailed contents of prohibited actions (“Disassembling Prohibited” in
the example on left) are shown in the mark.
This indication is shown where any person is supposed to be injured
or any property damage is supposed to occur if this indication is
neglected or equipment is not operated correctly.
CAUTION
DANGER
This indication is shown where any person is supposed to be in danger
of being killed or seriously injured if this indication is neglected or
equipment is not operated correctly.
●
marks indicate a specific action that must be followed or instruction.
Detailed contents of instructions (“Ensure the ground wire is connected
to a grounded terminal” in the example to the left.)
To Next Page
Loading...
